BT Openreach™ NTE-2005 ADSL Faceplate

ADSL2+ Version       Download User Guide           Manufacturer Data Sheet

This faceplate provides the same benefits as the NTE5/BT Broadband Accelerator bell wire filter with the ADDITION of ADSL filtering.

The NTE2005 replaces the lower front half of a BT NTE5 type master socket, manufactured by Pressac UK who supply BT.

The NTE2005 is the type of ADSL faceplate that BT supply, it fits on to BT NTE5 master socket (also available-see below), supplied with user instructions, cable tie & screws. It allows the router or modem to be plugged directly into the master socket which often results in a better connection as it is no longer reliant on plug in filters or unreliable poor quality extension wiring. The faceplate provides an ADSL modem/router outlet and a standard BT filtered telephone outlet. IDC connectors on the rear allow the provision of FILTERED & UNFILTERED extensions, ie, you only need this faceplate and not a microfilter at each extension. IDC tool required ONLY if fitting extension wiring. Please note this version is the 6 way IDC version which allows both filtered and unfiltered extensions, we also supply the version with 3 way IDC block for connecting a modem/router via the front socket ONLY, please see HERE. Latest ADSL 2+ Service Specific Faceplate (SSFP) which is a direct replacement for the ADSL V1.0 version.

Key Features

• Line: BS6312 approved integrated 431A plug.
• Telephone : Connection via BS6312 4 way BT socket.
• Modem : Direct coupled RJ45 (RJ11 compatible) socket.
• Approved by BT Openreach.
• Extension / ADSL wiring : 6 way IDC connector
• Filters all connected voice equipment so negating the need for microfilters.
• Moulded from V0 rated material colour matched to BT 1P white.
• Tested by BT to SIN 346 Issue 2.2
• Compatible with Calling Line Identification working.
• CE Marked - BS EN 55022.